Breathe easy again
Tell us what's going on and a Spokane mold professional will contact you with a quote. We're an independent guide, not a removal company. How this site works.
Get a free quote
Spokane, Spokane Valley and nearby towns
Mold removal & remediation in Spokane, WA
Tell us what you're seeing. A local mold professional finds the cause, removes the mold safely and shows you it's gone. Free quote, no obligation.
- Moisture source found and fixed, so it doesn't come back
- Area sealed off so spores don't spread
- Clearance check before walls are closed up
Free quotesNo cost, no obligation
Local prosSpokane County only
Fast replyUsually within a business day
Straight adviceBased on EPA and WA Health guidance
How mold gets fixed properly
Killing the mold you can see is not the job. A proper remediation finds the water, removes what's damaged and proves the area is clean. This is what a good Spokane mold pro does.
- 01
Find the water
Moisture meter and thermal camera to find the leak, the snowmelt or the condensation feeding it.
- 02
Seal it off
Plastic walls and negative air pressure so spores don't travel to the rest of the house.
- 03
Remove and clean
Moldy drywall, insulation and carpet come out. Framing is cleaned, HEPA-vacuumed and dried.
- 04
Prove it's gone
A clearance check, ideally an independent air test, before anything is closed up.
From this, to this
Drag the line. A proper job doesn't paint over mold: the damaged drywall comes out, the moisture is fixed, and you get a dry, clean, finished room back.
- Moldy drywall and baseboard removed and replaced
- Leak or condensation fixed first
- Checked clean before walls are closed
Removal, inspection or testing
Not sure which you need? Pick the closest one, or just ask for a quote and the pro will tell you.
Quoted per job
Mold removal
For mold over about 10 square feet, or inside walls, ceilings and crawl spaces. Sealed off, removed, cause fixed.
Learn more
From about $425
Mold inspection
Finds where moisture and mold are hiding, how much there is and why. Readings, lab samples and a written report.
Learn more
About $100 a sample
Mold testing
Air or surface samples read by a lab, to confirm hidden mold or prove a cleanup worked. Only when it is worth it.
Learn moreTip: start with an inspection, not a removal quote. Companies that sell removal often inspect for free and earn more when they find a problem. Once you know what you have and where the water comes from, every removal quote is for the same job.
From a musty smell to clean air
Using this site is free. You only pay the professional, and only if you hire them.
1Tell
What you see or smell, where you are, how soon. About a minute.
2Match
We pass it to a mold professional who serves your part of Spokane County.
3Fix
They contact you with a quote, usually within a business day. You decide.
It usually starts small
Mold needs moisture. In Spokane that usually means spring snowmelt around basements and crawl spaces, roof leaks after snow and ice, plumbing leaks, and condensation on cold windows in winter. It grows where you can't see.
Serving all of Spokane County
Homeowners and home buyers in Spokane, Spokane Valley and the towns around them. Not listed? Ask anyway.
- Spokane
- Spokane Valley
- Liberty Lake
- Cheney
- Airway Heights
- Mead
- Deer Park
- Medical Lake
- Nine Mile Falls
Good questions
How much does a mold inspection cost in Spokane?
Most Spokane mold inspections with lab testing cost about $300 to $600. Published local prices we checked in October 2026 start at around $425 for a standard inspection with one indoor air sample, an outdoor comparison sample and lab fees, with each extra sample about $100, so a typical three-sample job is about $525. A visual inspection without lab samples costs less. Always ask whether the lab fee and the written report are included.
Is mold testing worth it?
Mold testing is worth it when you suspect mold you cannot see, after a leak or flood, before buying a house, or to confirm a cleanup worked. If you can already see or smell mold, the Washington State Department of Health says sampling is usually not needed: the priority is finding the moisture and removing the mold.
Can I clean up mold myself?
Yes, if the area is small. The EPA and the Washington State Department of Health both say you can usually clean mold yourself when it covers less than about 10 square feet, roughly a 3 by 3 foot patch. For larger areas, mold from sewage, or mold hidden in walls or ducts, hire a professional. Fix the water source first or the mold comes back.
Are you a mold removal company?
No. Mold Removal Spokane is an independent guide and referral service. We do not remove, inspect or test mold ourselves. When you request a quote, we pass your request to a local professional who serves your area so they can contact you.